CALBLOCK-F-006: Wide Survey¶
Observation configuration file¶
Not applicable
Scheduling¶
Scheduled by EC-SURV.
NISP slew darks, VIS biases, darks, flats, CTI, and short science exposures are taken as part of the ROS and processed when suitable. Other CalProducts are computed / validated / updated on other timescales, or as needed.
In case of failure, skipped and / or replanned by EC-SURV depending on severity.
Time-critical¶
No.
Dependencies¶
None.
Objective¶
The Euclid Wide Survey provides a range of “inline” calibration products as part of the ROS, e.g. VIS flats, biases, darks, CTI and trap pumping, and short science exposures. Different flavors of the ROS are available, cycling through the biases, darks, flats and CTI-related calibrations. Two short science exposures are always executed per ROS. The short science exposures have scientific value, extend the dynamic range, and can be used to validate the VIS nonlinearity and BFE corrections.
During field slews, NISP is taking slew darks. The survey data themselves can be used for a wide range of calibration purposes, from updating and validation of calibration products to trend analysis.
Observations¶
Execute the wide survey.
VIS Cycling: The VIS ROS-inline calibrations follow the nominal wide-survey cycling, as described in ROS: inline VIS calibrations and cadences.
Fulfilling¶
The following CalProducts are obtained by dedicated inline calibrations in the ROS:
CALPRODUCT-NI-014: NISP Slew Darks
CALPRODUCT-VS-005: VIS CTI Charge Injection Lines
CALPRODUCT-VS-018: VIS Extended Pixel Edge Response (CTI-EPER)
CALPRODUCT-VS-025: VIS Trap Pumping
CALPRODUCT-VS-014: VIS LED Pixel Response Non-uniformity (PRNU)
CALPRODUCT-VS-020: VIS Blooming threshold
The wide survey data can be used to build, validate and trend a large number of CalProducts.
Given sufficient statistical power, some of these models could also be updated:
CALPRODUCT-NI-001: NISP Bad Pixel Map (continuous update, wrt. persistence)
CALPRODUCT-NI-005: NISP Cross-talk (validate model)
CALPRODUCT-NI-012: NISP Persistence (validate model)
CALPRODUCT-NP-001: NISP-P Absolute Photometric Standards (validate photometry when encountered)
CALPRODUCT-NP-002: NISP-P Focal Plane Astrometric Solution (changes with filter position)
CALPRODUCT-NP-004: NISP-P Dichroic Ghost Model (validate model)
CALPRODUCT-NP-007: NISP-P PSF Model (validate model, update for respective exposure)
CALPRODUCT-NP-008: NISP-P Straylight Check (validate model)
CALPRODUCT-NS-002: NISP-S Absolute Photometric Standards (validate photometry when encountered)
CALPRODUCT-NS-003: NISP-S Focal Plane Distortion (validate model)
CALPRODUCT-NS-006: NISP-S Spectral Trace Calibration (validate model)
CALPRODUCT-NS-011: NISP-S Dichroic Ghost Model (validate model)
CALPRODUCT-NI-015: NISP Snowballs (monitor event rate)
CALPRODUCT-VS-002: VIS Passband Variations (DEACTIVATED) (built from survey data, if possible)
CALPRODUCT-VS-004: VIS Brighter-fatter Effect (BFE) (validate model)
CALPRODUCT-VS-007: VIS Cosmetic Map (validate model)
CALPRODUCT-VS-008: VIS Cross-talk (validate model)
CALPRODUCT-VS-010: VIS Focal Plane Astrometric Solution (validate model)
CALPRODUCT-VS-011: VIS Photon Transfer Curve (PTC) (validate model)
CALPRODUCT-VS-012: VIS Dichroic Ghost Model (validate model)
CALPRODUCT-VS-016: VIS Nonlinearity (validate model)
CALPRODUCT-VS-019: VIS PSF Calibration (validate model)
CALPRODUCT-VS-021: VIS Straylight Check (validate model)
CHAR-SURV-004: Zodiacal Model (validate model)
Targets and pointing constraints¶
Pointing: Straylight suppression as per MOCDA-SYS-003. AA and SAA variations shall be minimized.
Wide survey area.
Instrument configuration¶
Instrument: Wide survey
Methodology / Uplink procedure¶
Entity: VIS and NISP
Commanding Method:
Dither Sequence: ROS
Inter-operability constraints¶
None.
In-orbit duration¶
In-orbit Duration: 0 h (obtained as part of the wide survey)
Processing input¶
Ground Processing Input Data:
Data Description:
Quality control parameters¶
DataModel: https://gitlab.euclid-sgs.uk/
Contact person¶
Calibration Lead